ERRTH
FLEX
Exterior Wall System with Recycled Rubber
Major Improvements Have Been Made To Errth Flex Base Coat and Application. Click Here
|
ERRTH Exterior Wall System with Recycled Rubber Major Improvements Have Been Made To Errth Flex Base Coat and Application. Click Here |
|
|
MATERIAL SAFETY DATA SHEET
Errth Flex-TopCoat
MSDS Version # 001 MSDS DATE: 7/12/2006 MSDS Code: 11201
I. PRODUCT IDENTIFICATION Errth Flex-TopCoat Acrylic Textured Top Coat SUPPLIER:Errth Flex Coatings, INC 7691 E Fledgling Dr. Scottsdale, AZ 85255
EMERGENCY CONTACT: Richard Walker 602-284-4045
HMIS CD:HLTH 0 FLAM 0 REACT 0 PROTECT 0 MATERIAL USE: Architectural Coating
II. COMPONENT DATA
HAZARDOUS INGREDIENT: % BY WEIGHT: None CAS NUMBER: Not Applicable LD50 Not Applicable SPECIES Not Applicable ROUTE: Not Applicable LC50 INHALATION: Not Applicable TLV: Not Applicable WHMIS CLASS: Not Controlled
III. PRECAUTIONS FOR SAFE HANDLING AND STORAGE VENTILATION: Good general ventilation is sufficient for most conditions. HANDLING AND STORAGE: Use in a well-ventilated area. Keep from freezing. Store between 40 and 105° F
IV. PHYSICAL DATA PHYSICAL STATE: Viscous white colored liquid with slight odor APPEARANCE AND ODOR: BOILING RANGE: 212°F FREEZING POINT: 32°F VAPOR PRESSURE: Not Established VAPOR DENSITY (AIR=l): Not Established SOLUBILITY IN WATER: Miscible PH RANGE: 7.5 to 8.5 COEFFICIENT OF OIL/WATER
DISTRIBUTION:
Not Established % VOLATILE BY VOLUME: 48 - 51% VOC <50 g/L
V. PERSONAL PROTECTIVE EQUIPMENT REQUIREMENTS RESPIRATORY PROTECTION: Wear respirator if spraying.
SKIN PROTECTION:
Use rubber or plastic gloves.
VI. FIRE & EXPLOSION HAZARD INFORMATION
FLAMMABILITY:
Not Flammable UEL: Not Applicable AUTO IGNITION TEMPERATURE: Not Established EXTINGUISHING MEDIA: Not Combustible FIRE AND EXPLOSIVE HAZARDS: Liquid paint will not burn but may spatter above the boiling point. Dried paint will burn. FIRE FIGHTING EQUIPMENT: Wear self-contained positive pressure breathing apparatus HAZARDOUS DECOMPOSITION PRODUCTS: Products of incomplete combustion include Oxides of Carbon, Nitrogen, and Toxic Hydrocarbons, heavy fumes and smoke SENSITIVITY TO IMPACT: None Known SENSITIVITY TO STATIC DISCHARGE: None Known
VII. REACTIVITY INFORMATION
STABILITY:
Stable under normal conditions. HAZARDOUS POLYMERIZATION: Will not occur.
VIII. FIRST AID
EYES: Irrigate immediately with plenty of low pressure water for at least 15 minutes. Call a physician. SKIN: Wash with soap and plenty of running water. INGESTION: If swallowed induce vomiting. Keep at rest. Consult a physician. INHALATION: Remove to fresh air. If dizziness, headache or other symptoms persist, consult a physician.
IX. TOXICOLOGY AND HEALTH INFORMATION EYE CONTACT: May cause slight temporary eye irritation. SKIN CONTACT: May be slightly irritating to skin. INGESTION: Very low order of toxicity. No hazards are anticipated from ingestion incidental or handling. INHALATION: At room temperature, vapor is minimal, but may cause headache or nausea in poorly ventilated areas. SYSTEMIC AND OTHER EFFECTS: None known.
EXPOSURE LIMITS:
Not established REPRODUCTIVE TOXICITY: Not indicated
MUTAGENICITY:
Not indicated
X. TRANSPORTATION INFORMATION REFERENCE BILL OF LADING.
XI. SPILL AND LEAK PROCEDURES LEAK AND SPILL PROCEDURE: Prevent entry into sewer or natural waterway. Soak up with non-flammable, absorbent material. Remove to closed container for disposal.
XII. WASTE DISPOSAL
WASTE DISPOSAL:
Dispose of product and materials used in cleaning up spills or leaks in a
manner which
XIII. ADDITIONAL REGULATORY STATUS INFORMATION FEDERAL REGULATIONS: SARA Hazard Categories (EPCRA 311/312): Not Hazardous STATE REGULATIONS: CA Prop 65: This product contains a chemical(s) known to the State of California to cause cancer.
V. MAJOR REFERENCES PREPARED BY: ERRTH FLEX Coatings, INC DATE: 11-15-2006 SOURCES: The information used to prepare this Material Safety Data Sheet is based on information provided by our raw materials suppliers.
Important: While the descriptions, designs, data, and information contained herein are presented in Good Faith and believed to be accurate, it is provided for your guidance only. Because many factors may affect processing or application/use, we recommend that you make tests to determine the suitability of a product for your particular purpose prior to use. No warranties of any kind, either expressed or implied, including warrantees of merchantability or fitness for a particular purpose, are made regarding products described or design, data, or information set forth, or that the products, designs, data, or information may be used without infringing the intellectual property rights of others, In no case shall the descriptions, information, data, or designs provided be considered a part of our terms and conditions of sale. Further, you expressly understand and agree that the descriptions, designs, data, and information furnished by Errth Flex Coatings, LLC hereunder, are given gratis and Errth Flex Coatings, LLC assumes no obligation or liability for the description, designs, data, and information given or results obtained. All such being given and accepted at your risk.
|
|
GREEN Alternative To Stucco And Efis
|