History

oxide wall panel by a Miami-Dade Building Cede accredited testing lab. Six panels were "shot" by a 150MPH 2"x4" "missile". All panels passed the test.

iii. Currently undergoing extensive additional testing in southern California by Ramtech Laboratories in preparation for a full ICC Evaluation Report. Early results have been very good,

including passing the "Wind Driven Rain" test at 135MPH.

b. All Errth Flex Coatings are manufactured in Phoenix, Arizona under

extreme Quality Assurance Standards and Controls.

i. Every batch of product is closely controlled and extensive

QC records are kept on each batch.

ii. Check your pails, they have a batch number on them. We keep the production records on every batch and samples of product from each batch as well.

iii. You should always log your batch numbers when you receive product on your job site. Log the numbers on your Packing Slip.

3.All contact with Errth Flex Coatings should go through Richard Walker at 602-284-4045 or email Richard@errthflex.com.

4. Product Line Overview

a. Errth Flex coatings are all manufactured from the same resin base materials. This means that all of our products adhere to each other very well.

b. We use no cement or silica sand in our manufacturing.

c. Over 48% of the content of our products is either recycled or salvaged materials.

d. All products are shipped in 5 Gal. pails; each product is completely labeled. That way there is no

confusion on the job site.

e. Products are shipped by weight not by gallons.

Product should be stored out of direct sunlight when in the temperatures we have in Arizona.

The product should never be allowed to freeze!!!

f. Product shelf life is in excess of one year, as long as you keep the

pails sealed and store per our directions.

g. Cleanup is water and dish soap, soak your tools over night and

they will cleanup quickly. Same for shoes.

h. MSDS & Product Sheets are in the folders.

5. Colors, Textures and Finishes.

a. Errth Flex Top Coat comes in almost any color and four textures at this time, Extra Fine, Fine. Medium and Corse.

6. Hand applied or sprayed?

a. In most cases hand application of Errth Flex Base is the best method. Exceptions would be large walls that are not "cutup". You will find Errth Flex Base to be the easiest material you have ever applied.

B. Application of Errth Flex Top Coat will depend on the finished surface

you are trying to achieve.