ERRTHFLEX

                    Exterior Wall System with Recycled Rubber

Major Improvements Have Been Made To Errth Flex Base Coat and Application. Click Here

          Home               

About Errth Flex

History And Details 

Errth Flex Base Coat

Errth Flex Top Coat

Recent Projects

Previous Projects

Technical Data Slide Show

Contact Us

 

 

 

Back

 

MATERIAL

SAFETY

DATA

SHEET

 

Errth Flex-Base

 

MSDS Version # 001     MSDS DATE: 7/12/2006 MSDS Code: 11201

..................................................................................................................

 

I. PRODUCT IDENTIFICATION

 

PRODUCT:                    Errth Flex-Base Rubberized Base Coat

 

SUPPLIER:                                  Errth Flex
                                                      7691 E Fledgling Dr.

                                                      Scottsdale AZ 85255

EMERGENCY CONTACT:      Richard Walker 602-284-4045

 

HMIS CD:                                            

HLTH 0

FLAM 0

REACT 0

PROTECT 0
MATERIAL USE:  Architectural Coating

 

II. COMPONENT DATA

 HAZARDOUS INGREDIENT:      None

% BY WEIGHT: Not Applicable

CAS NUMBER: Not Applicable

LDS0 SPECIES, ROUTE: Not Applicable

LC50 INHALATION: Not Applicable

TLV: Not Applicable

WHM1S CLASS: Not Controlled

 

Ill. PRECAUTIONS FOR SAFE HANDLING AND STORAGE

 VENTILATION: Good general ventilation is sufficient for most conditions

HANDLING AND STORAGE: Use in a well ventilated area¸ Keep From Freezing. Store between 40º and 105º F

 

IV. PHYSICAL DATA

PHYSICAL STATE: Viscous white colored liquid with slight odor.

APPEARANCE AND ODOR:

BOILING RANGE: 212 F

FREEZING POINT: 32°F

VAPOR PRESSURE: Not Established

VAPOR DENSITY (AIR 1): Not Established

SOLUBILITY IN WATER: Miscible

PH RANGE: 75 to 8.5

COEFFICIENT OF OIL/WATER

DISTRIBUTION:                                 Not Established
ODOR THRESHOLD:                         Not Established
SPECIFIC GRAVITY:                        1.6 - 1 7

% VOLATILE BY VOLUME:       48 - 51%

VOC                                                <50 g//L

  

V. PERSONAL PROTECTIVE EQUIPMENT REQUIREMENTS

RESPIRATORY PROTECTION:   Wear respirator if spraying.

SKIN PROTECTION:                         Use rubber or plastic gloves

EYE PROTECTION:                           Use safety glasses with side shields or chemical goggles

 

VI. FIRE & EXPLOSION HAZARD INFORMATION

 FLAMMABILITY:                              Not Flammable
FLASH POINT:                                    Not Applicable
FLAMMABLE LIMITS:                     LEL: Not Applicable

                                                                UEL: Not Applicable

AUTO IGNITION TEMPERATURE: Not Established

EXTINGUISHING MEDIA:              Not Combustible

FIRE AND EXPLOSIVE HAZARDS: Liquid paint will not bum but may spatter above boiling point Dried paint film will burn

FIRE FIGHTING EQUIPMENT: Wear self-contained positive pressure breathing apparatus

HAZARDOUS DECOMPOSITION PRODUCTS: Products of incomplete combustion include oxides of carbon, nitrogen and toxic hydrocarbons, heavy fumes and smoke

SENSITIVITY TO IMPACT: None Known

SENSITIVITY TO STATIC DISCHARGE: None Known

 

VII. REACTIVITY INFORMATION

 STABILITY:                                            Stable under normal conditions
INCOMPATIBILITY:                            Avoid strong oxidizing agents

HAZARDOUS POLYMERIZATION:  WiI1 not occur

 

VIII. FIRST AID

EYES: Irrigate immediately with plenty of low pressure water for at least 15 minutes Call a physician.

SKIN: Wash with soap and plenty of running water

INGESTION: If swallowed induce vomiting Keep at lest Consult a physician.

INHALATION: Remove to fresh air If dizziness, headache or other symptoms persist, consult a physician


 

XIV. TOXICOLOGY AND HEALTH INFORMATION

 EYE CONTACT:                 May cause slight temporary eye irritation
SKIN CONTACT:                May be slightly imitating to skin.
INGESTION:                        Very low order of toxicity No hazards are anticipated from ingestion incidental or handling
INHALATION:                    At room temperature, vapor is minimal, but may cause headache or nausea in poorly ventilated areas

SYSTEMIC AND OTHER EFFECTS: None known

EXPOSURE LIMITS:                         Not Established
CARCINOGENICITY:                      Not indicated
TERATOGENICITY:                         Not indicated

REPRODUCTIVE TOXICITY:     Not indicated

MUTAGENIClTY:                  Not indicated
SYNERGISTIC PRODUCTS:       None Known

 

X. TRANSPORTATION INFORMATION

 REFERENCE BILL OF LADING.

 

XI. SPILL AND LEAK PROCEDURES

 LEAK AND SPILL PROCEDURE: Prevent entry into sewer or natural waterway Soak up with non-flammable, absorbent material Remove to closed container for disposal.

 

XII. WASTE DISPOSAL

 Dispose of product and materials used in cleaning up spills or leaks in a manner which is approved by federal and local requirements

 

XIII ADDITIONAL REGULATORY STATUS INFORMATION

 FEDERAL REGULATIONS: SARA Hazard Categories (EPCRA 311/312): Not Hazardous

STATE REGULATIONS:

CA Prop 65: This product contains a chemical(s) known to the State of California to cause cancer.

 

.MAJOR REFERENCES

PREPARED BY: Errth Flex Coatings, INC

June 15, 2006
 

SOURCES:     The information used to prepare this Material Safety Data Sheet is based on information provided by our raw materials suppliers¸

Important; While the descriptions designs, data, and information contained herein are presented in Good Faith and believed to be accurate, it is provided/or your guidance only Because many factors may affect processing.

No warranties of any kind. either expressed or implied, including warrantees of merchantability or fitness for a particular purpose, are made regarding products described or design, data, or information set forth, or that the products, designs, data, or information may be used without infringing the intellectual property rights of others, In no case shall the descriptions, information, data, or designs provided be considered a part of our terms and conditions of sale. Further, you expressly understand and agree that the descriptions, designs, data, and information furnished by Errth Flex Coatings hereunder, are given gratis and Errth Flex Coatings assumes no obligation or liability for the description, designs, data, and information given or results obtained¸ All such being given and accepted at your risk¸

 

Back

                                                                                                                              

                                                                                                                                                                                   

    The Only Wall Coating That Removes Tires From Land Fills

                             

The GREEN Alternative To Stucco And Efis